Seagate ST500LM021 500GB Internal Hard Drive 2.5" HDD, SATA III - 6Gbs, 32MB Cache, 7200RPM, OEM

Product Information

Our last series of synthetic benchmarks compare the hard drives in a series of server mixed-workloads with a queue depth of ranging from 1 to 128. Each of our server profile tests has a strong preference towards read activity, ranging from 67% read with our database profile to 100% read in our web server profile. In all of our mixed workloads, the Seagate Gen3 performed exceptionally. For each test, it ranked either first or second along with the Seagate Gen2. Overall, the SSHDs performed significantly better than standard HDD’s. The Gen2’s slight performance advantage over the Gen3 comes from its 7,200 RPM spins compared to the Gen3’s 5,400 RPM (with Seagate’s standardization of laptop drives to 5,400 RPM). Als u wilt controleren of de firmware-update is gelukt, opent u Apparaatbeheer > Schijfstations > ST320LM010/ST500LM021 > Eigenschappen > Meer informatie > Hardware-ID en controleert u de firmwareversie. The Serial ATA interface connects each disk drive in a point-to-point configuration with the Serial ATA host adapter. There is no master/slave relationship with Serial ATA devices like there is with parallel ATA. If two drives are attached on one Serial ATA host adapter, the host operating system views the two devices as if they were both “masters” on two separate ports. This essentially means both drives behave as if they are Device 0 (master) devices. Device manufacturers may change any parameters without prior notice. There is no warranty that the information listed here is complete and accurate. If you encounter any improper value, please let us know. If you have this type of hard disk, please select Send test report to developer option from the Report menu.

Hard Disk Sentinel - Technical details for disk SEAGATE

In the File Server profile, the Seagate Gen3 offered substantially better performance than all of the competition from 8-64 IOPS at 3x-5x. However, at 128 IOPS, the Gen2 was tops. Seagate’s provided power values came very close to the data we collected from our tests. Our actual idle rate measured 1.15 watts, while active power values ranged from 3.20 to 2.07 watts. Our sequential write pattern had the highest power values and the random 4K read test had the lowest. Seagate’s active seek number falls right in that range. Startup power requirements measured 4.01 watts to get the drive to operating speed. Seagate ST500LM021 500GB 2.5" 6.0 Gbps 7200 RPM Hot Swappable Momentus Thin Serial Advanced Technology Attachment Hard Disk Drive - Brand New Het systeem wordt opnieuw opgestart en de firmware wordt geladen. Nadat de firmware-update is voltooid, start het systeem weer normaal op in Windows. Our Database profile again showed the Seagate Gen3 as a strong runner-up to the Gen2 plateauing at 64 IOPS, steady to 128.

When it comes to measuring performance of the Seagate SSHD Thin the two categories of benchmarks that we commonly test all consumer HDDs and SSDs on show strengths in different areas. Our synthetic benchmarks are geared at showing the performance of the drive in an uncached “worst case” scenario, while our real-world traces allow the drive to cache data and better show how the drive would perform during repetitive day-to-day activities. Since the SSHD is really geared towards those workloads, we put more weight on than in this review than we would normally do for traditional HDDs or SSDs.

Seagate ST500LM021 500GB SATA Hard Drive - DiscTech Seagate ST500LM021 500GB SATA Hard Drive - DiscTech

Voer SeagateFirmwareUpdate_SeaFlash_Dell_YarraX_SDM10393_12-11-2015_11-47-28.exe uit als administrator. While not a bombshell, Seagate’s Gen3 model does provide cost-efficient performance and a significantly lower starting price than the Gen2 Momentus XT 750GB. Our benchmarking shows the Gen3 and Gen2 both outperform HDDs where it matters, in our real world traces where the onboard cache can really show its performance benefits. In that case, where data is nicely cached, the new 500GB Thin bests the 750GB Gen2 product by a significant margin. Rounding out the figures, in our Workstation profile, the Gen3 placed a solid second, again to the Gen2. The Gen3 plateaued at 64 IOPS and had a minor decrease at 128 IOPS. Het volgende scherm is een waarschuwingsscherm. Lees de inhoud zorgvuldig door en selecteer Volgende als u akkoord gaat. In het volgende scherm wordt de licentieovereenkomst weergegeven. Als u akkoord gaat, klikt u op "Ik accepteer de voorwaarden van de licentieovereenkomst" en klikt u vervolgens op Volgende.Along with the change in nomenclature, Seagate implemented several platform changes to the SSHD Gen3 as well. While Gen2 provided users with 8GB SLC NAND, the Gen3 switched to 8GB MLC NAND. This modification does sacrifice some endurance, but the majority of users won’t deplete the endurance for the lifetime of the drive’s warranty making it mostly a non-issue. By switching to MLC NAND, Seagate is also able to reduce the Gen3 production cost greatly and thus lower the price significantly. Seagate has also decided to streamline their laptop drive production by exclusively offering 5,400 RPM drives. So while the Gen2 had a 7,200 RPM drive, the Gen3 spins at 5,400 RPM. Thanks to improvements in the cache technology, the cache miss pain of hitting the slower spinning drive should be mitigated, but regardless, hitting the drive without flash assistance is going to hurt a little more than in the Gen2 drive. The new SSHD Gen3 line also gets a naming convention update. The first generation hybrids were called Momentus XT, while the second generation models were called Momentus XT with Fast Factor. Now, Seagate has dropped Momentus family branding altogether, opting instead for the simpler category name of SSHD. To help clarify drive generations, StorageReview will reference the drives on a go-forward basis with the SSHD generation number to help clarify the chronology for consumers (Gen1, Gen2, Gen3).